Aluminium Plate, Coil & Foil · 1xxx–8xxx · Middle East & Africa

Aluminium plate, coil and foil — supplied the way fabricators actually buy it.

6061-T6 / T651, 5083 / 5086 marine, 5052 / 5754 / 5454 tanker grades, 6082 and 7075 — plate up to 2,650 mm wide and 16 m long, coil and foil slit to your width, cut to your sizes, with mill certificates and an MOQ of 5 t per grade, FOB or CIF to your port.

Request a Quote → View Specifications

Mill test certificates included MOQ 5 t per grade Cut-to-size & slitting

Quick Spec — 6061-T6 Plate

Thickness0.3 – 500 mm

Widthup to 2,800 mm

Lengthup to 16,000 mm

TemperT6 / T651 / T4 / H112

StandardASTM B209 / EN 485

Lead time7 – 45 days

IncotermsFOB / CIF / CFR

Products

Alloys and forms we supply

Plate, coil and foil from 1xxx to 8xxx — 0.2 mm sheet to 600 mm plate, coil slit to your width, cut to your sizes.

6061-T6 / T651 Plate

Machining and structural grade. 0.3–500 mm thick, up to 2,800 mm wide. T4 / T6 / T651 / H112, including pre-stretched 6061-T651.

5083 / 5086 Marine

0.5–500 mm, class-approved (CCS / BV / LR / DNV). Hulls, decks, superstructures, fishing boats and LNG storage.

5052 / 5754 / 5454

Anti-corrosion, weldable grades, 0.1–600 mm. Tanker bodies, fuel tanks, pressure vessels, hoppers and panels.

6082 / 7075 Tooling

Higher-strength grades for transport bodies, moulds and demanding machined parts. 6082 to 300 mm; 7075 from 1 to 200 mm.

3003 / 3105 / 1060 / 1100

Building and general-purpose sheet, 0.1–500 mm. Facades, roofing, signage, deep-drawn and anodised parts.

Tread Plate & Cut-to-Size

1-bar, 3-bar and 5-bar tread, 0.8–8.0 mm in 5083 / 5052 / 5754 — plus sawn and sheared plates to your cutting list.

Aluminium Coil

1050 / 1060 / 1100 / 3003 / 3105 / 5052 / 5754 / 8011 — 0.2–8 mm, up to 2,650 mm wide, coil ID 505 / 508 mm, 2–8 t per coil, slit to your width.

Aluminium Foil

1235 / 8011 / 8079 / 8021 — 0.006–0.2 mm, jumbo roll or small roll, for insulation, packaging, cable and heat exchangers.

Coated & Embossed

PE / PVDF colour-coated and stucco-embossed coil and sheet for roofing, cladding, ceilings and signage — 0.2–3 mm.

Specifications

Full plate, coil and foil range — 1xxx to 8xxx

Plate specs first, then coil and foil. Non-standard sizes, other alloys and custom cutting are available on request.

Parameter	Range / Standard	Notes
Alloy grades	1050 / 1060 / 1100 / 3003 / 3105 / 5052 / 5083 / 5086 / 5182 / 5454 / 5754 / 6061 / 6082 / 7075	1xxx–8xxx; other grades on request
Temper	O, H12 / H14 / H16 / H18 / H24 / H32 / H34 / H38, H111 / H112 / H116 / H321, F, T4 / T6 / T651 / T7351	Matched to your application
Thickness	0.2 – 600 mm	Sheet 0.2–8 mm · plate 8–600 mm · common 5 / 6 / 8 / 10 / 12 / 16 / 20 / 25 / 30 / 40 / 50 mm
Width	up to 2,650 mm (6061 up to 2,800 mm)	Wide plate reduces welding and joints; cut-to-width available
Length	500 – 16,000 mm	Saw cut to your cutting list
Surface	Mill finish / PVC filmed / anodising quality	PVC protection recommended for marine & export
Standards	ASTM B209 · EN 485 · GB/T 3880	Marine plate under CCS / BV / LR / DNV class approval
Certification	Mill test certificate per lot	SGS / ISO 9001 mill; heat number traceable
MOQ	5 t per grade / specification	Minimum applies per grade and size
Lead time	7 – 45 days	Typically 15–25 days from order confirmation
Terms	FOB / CIF / CFR	T/T, L/C — packing and port terms per order

Coil & Foil

Coil & foil range — 1xxx to 8xxx

Slit-to-width coil and jumbo or small rolls of foil, from the same mills.

Parameter	Range / Standard	Notes
Alloy grades (coil / foil)	1050 / 1060 / 1100 / 3003 / 3105 / 5052 / 5754 / 8011 / 1235 / 8079 / 8021	1xxx–8xxx flat products; other grades on request
Thickness	coil 0.2 – 8 mm · foil 0.006 – 0.2 mm	Slitting and cut-to-length lines available
Width	up to 2,650 mm	Coil slit to your width, min. 20 mm
Coil ID / weight	505 / 508 mm ID · 2 – 8 t	Custom coil weight on request
Temper	O, H14 / H16 / H18 / H22 / H24 / H26 / H32 / H34	Soft to full-hard
Surface	mill finish / stucco / embossed / PE or PVDF coated	PVC film on request
Packing	eye-to-sky or eye-to-wall	Wooden pallet, steel strapping, plastic film and corner protection
MOQ	5 t per grade / spec	Same MOQ basis as plate

Industries We Serve

Where our plate ends up

Six buyer groups we supply most often — with the grade normally specified for each.

Tanker & trailer building

5052 / 5754 / 5454 and 5083 for tanker barrels, fuel tanks, tipper bodies and trailer panels — 3–8 mm.

Marine & shipbuilding

5083 / 5086 class-approved plate for hulls, decks, superstructures and workboats — PVC-filmed.

Machining & tooling

6061-T6 / T651 and 7075 for jigs, fixtures, base plates, moulds and CNC parts. Pre-stretched T651 available.

Building & façades

3003 / 3105 / 1100 and 5052 for curtain wall, roofing, cladding and signage — anodising quality.

Transport & EV

6061 and 6082 for battery trays, housings and structural brackets; 3003 for cooling plates.

Pressure vessels & chemical

5083 / 5454 and 6061 for pressure vessels, silos, hoppers and process equipment.

Compare Grades

Which alloy for which job

Reference values for the grades buyers ask about most. Confirm against the mill certificate for your order.

Grade	Typical tensile (MPa)	Corrosion	Typical applications
5052-H32	230–260	Excellent	Tanks, panels, marine fittings
5083-O / H111	275–350	Excellent (marine)	Hulls, cryogenic tanks, pressure vessels
6061-T6 / T651	290–310	Good	Machined parts, structures, battery trays
6082-T6	290–340	Good	Transport bodies, structural, anodised parts
7075-T6	540–580	Fair	Moulds, high-strength tooling

Quality Control

Every lot tested, traced to the heat number

Three stages on every order: incoming material check, in-process monitoring and final inspection before packing.

Material traceability

Heat number, chemical composition report and mill test certificate for every lot.

Mechanical testing

Tensile, yield, elongation and hardness to ASTM B209 / EN 485.

Dimensional & surface

Thickness tolerance, flatness, edge quality and PVC film checked before packing.

Third-party inspection

SGS, Intertek, BV or your own inspector — at the mill or before loading.

Digital micrometer measuring an aluminium test coupon — Micrometer check on a test coupon

What you receive with the plate

Mill test certificateEN 10204 3.1

Heat-number traceabilityPer lot

Tensile / yield / hardnessReported

Thickness toleranceEN 485 / ASTM B209

Witness inspectionOn request

Our Supply Network

A vetted panel of producers — not a single line

We buy from several audited Chinese aluminium producers across 1xxx–8xxx, so you get availability, price competition and a backup source on every order.

Several qualified suppliers

Each producer is audited for rolling capability, certification and export record — and re-checked on every order.

Better availability

If one producer is out of a size or temper, another has it. No single-line bottleneck on your delivery.

One standard, whoever rolls it

Same grade, tolerance and certification whichever mill runs your order — with the certificate that applies to that lot.

Packing & Loading

Packed to survive the port

Export-standard packing as default, adapted to how you unload at the other end.

Loading at a glance

Per 20' container≈ 20–27 t

Per 40' container≈ 24–27 t (weight-limited)

Mixed sizes in one containerYes

Surface protectionPVC film

Max plate length16,000 mm

Coil / foil packingEye-to-sky / eye-to-wall

PVC film on the surface, fumigated wooden pallets, steel strapping and corner protection.

Wooden crates on request — for wide plate, marine grades and long overland legs.

Loading plan with dunnage so plate cannot shift in transit.

Around 20–27 t per 20' container depending on size mix; mixed sizes in one container.

Coil and foil: eye-to-sky or eye-to-wall on wooden pallets, plastic film, steel strapping and corner protection.

Documents & Certification

The paperwork comes with the plate

Standard on every shipment — plus anything your customs broker or end customer asks for.

Mill test certificate (EN 10204 3.1) Commercial invoice Packing list Certificate of origin Bill of lading SGS / Intertek report — on request Class certificates CCS / BV / LR / DNV — marine Heat-number traceability

FAQ

Questions buyers ask before ordering

If yours is not here, send it on WhatsApp — we answer the same day where possible.

What is your minimum order?

5 tonnes per grade and size. Different grades can share a container, but each grade is counted on its own.

How fast do you quote?

Within 24–48 hours of a complete spec: alloy, temper, sizes, quantity and destination port.

Can you cut to size?

Yes — sawn or sheared to your cutting list, typically ±1 mm on sawn edges. Send a drawing or a list.

What are your payment terms?

T/T with deposit and balance against copy of B/L; L/C at sight for larger orders. Agreed per order.

Do you supply samples?

Small cut samples for evaluation are normally free; the buyer covers courier.

Which Incoterms do you work on?

FOB, CFR and CIF to Middle East and African ports as standard. DDP on request.

How long is a quotation valid?

Aluminium follows the LME, so we normally hold a price for 3–5 working days and re-confirm when you order.

How are quality claims handled?

Send photos and, where possible, a third-party report within 14 days of arrival; we replace or credit where the claim is confirmed against the certificate.

Do you supply coil and foil, or only plate?

All three. Plate and sheet 0.2–600 mm, coil 0.2–8 mm incl. slit-to-width, and foil from 0.006 mm — whatever our mills roll, we can quote.

Our Operation

How the material reaches you

Stock, handling, inspection and loading — the four stages every order passes through.

Inside the plate stock warehouse — real footage

Video not playing? Open it in a new tab

Aluminium plate bundles packed in kraft paper on wooden pallets — Plate bundles packed in kraft paper, stored on wooden pallets

Stock hall with packed plate bundles and overhead cranes — Stock hall with packed bundles and overhead cranes

Packed plate bundles in the storage aisles

Overhead crane over packed plate stock — Overhead crane over packed stock

Thickness check on an aluminium plate with the PVC film peeled back — Thickness check with the PVC film peeled back

Sawn edge of a thick aluminium plate — Sawn edge — clean cut face, ready for machining

Five-bar aluminium tread plate surface — Five-bar tread plate, 5083 / 5754

Container ship being loaded at a terminal — From our ports to yours — FOB / CIF

Why Us

Built for buyers who need the right material, on time

We are a sourcing and export house focused on aluminium flat products — plate, coil and foil — so we know the grades, the mills and the ports.

Supplied from a vetted mill panel

We buy from several audited Chinese producers covering 1xxx–8xxx — consistent quality, a real mill certificate, and a second source whenever a line is busy.

7–45 day lead times

Standard plate 15–25 days, custom sizes up to 45. We confirm the schedule before we promise it.

MOQ 5 t per grade

The 5-tonne minimum applies per grade and size — enough to stock, small enough to stay flexible. Send us your spec and we will confirm availability, lead time and a firm price.

Cut-to-size

Send your cutting list; receive plates ready for your machine — less scrap, less handling.

How It Works

From enquiry to container in four steps

STEP 01

Send your requirement

Alloy, temper, thickness, sizes and quantity — or just your cutting drawing.

STEP 02

Get a quote

Within 24–48 hours: unit price, MOQ, lead time and Incoterm, usually with a stock option.

STEP 03

Confirm & produce

Order confirmed, deposit received, production scheduled with regular progress updates.

STEP 04

Ship & document

Container loaded, full export documentation, mill certificates and shipping advice to your port.

Markets We Serve

Regular destinations

Experienced with the documentation, ports and buyer expectations across the Middle East and Africa — 22 markets and counting.

United Arab Emirates Saudi Arabia Qatar Kuwait Bahrain Oman Iran Iraq Jordan Lebanon Syria Palestine Yemen Turkey Egypt Libya Tunisia Algeria Morocco South Africa Kenya Nigeria

Need aluminium plate priced to your port?

Send your spec or cutting list — we will come back with a firm quote, MOQ and lead time, usually within 24–48 hours.

Request a Quote → Talk on WhatsApp

Contact

Let's talk about your order

Tell us the alloy, sizes and quantity — or send a drawing. We reply to serious enquiries the same day where possible.

Contact

Alex — Export Manager

[email protected]

+86 191 5464 3400 WhatsApp & calls

Office

Room D369, Rooms 301–353, No. 1 Kehua Street, Tianhe District, Guangzhou, China

Hours

Mon–Fri, 09:00–18:00 (Beijing time, GMT+8)